Title |
Publisher |
Price |
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for your wargaming board:
More scenery, buildings, streets and accessoirs can you download on Wargamevault.
This parts are included:
10 different trees:
Minimum printbed needed is 20 x 20 cm and 20 cm high. Scale is for 28mm Miniatures... [click here for more] |
ESLO |
$9.95 $8.50
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. Includes high and low detail versions, two wall variants, a doorway, single and double tile variants, including intersections.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect... [click here for more] |
2nd Dynasty |
$11.24
|
Two .stl files will let you print two different types of room dice with your 3d printer. One is corridors and one is rooms. They print nicely at one inch side. When you create a room, you just roll the appropriate die. You can print a lot of dice and use them to compose your map on the tabletop, or just print a few and draw them from an opaque bag and roll them every time you need to generate a room... [click here for more] |
Ganesha Games |
$5.00
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for your wargaming board:
A painting guide is also avaible on Wargamevault.
More scenery, buildings, streets and accessoirs can you download on Wargamevault.
This parts are included:
Minimum printbed needed is 20 x 20 cm and 20 cm high.... [click here for more] |
ESLO |
$9.95 $8.50
|
OVERVIEW
The Flat-D Terrain System Starter Kit includes 3d STL files for 21 clips and several basic terrainpieces.
PAY WHAT YOU WANT
This starter set is set as "Pay What You Want", so feel free to pay as much or as little as you find value in the system.
CLIPS
You're granted a free license to print or have printed these clips in any amount of... [click here for more] |
PEI Development |
Pay What You Want
|
Create your own starship deckplans with these base tiles! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions, including two wall types and three floor tiles suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these... [click here for more] |
2nd Dynasty |
$6.74
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for your wargaming board:
A painting guide is also avaible on Wargamevault.
More scenery, buildings, streets and accessoirs can you download on Wargamevault.
This parts are included:
Minimum printbed needed is 20 x 20 cm and 20 cm... [click here for more] |
ESLO |
$9.95 $8.50
|
Large RPG Cities, just like Rome or Paris, have sewer systems for the primary purpose of drainage, to keep their streets from flooding. the Sewers channel storm water away from the city.
Whether your RPG campaign is set in Balder's Gate, Calimport or Waterdeep in the Forgotten Realms; Beneath the sprawling streets of Ravnica, or in the underground canals of Sigil in the outer planes, your adventures... [click here for more] |
Zandoria |
$10.00
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi habitation rooms and modules.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter
Please note that these are STL files only! You will need a 3D printer or print service... [click here for more] |
2nd Dynasty |
$11.24
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi engineering sections.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter
Please note that these are STL files only! You will need a 3D printer or print service in order... [click here for more] |
2nd Dynasty |
$11.24
|
Gnarly Tree Pack
4 Gnarly trees hand sculpted in Z Brush
These will print without supports, so turn supports off on your printer
Like all our models, these trees are scaleable, so you can print different sizes to make a whole forest.
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$8.95
|
Create your own starship deckplans with these tiles! Allows the construction of machinery perfect for an engineering section, computer server room or the like.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter tiles.
Please note that these are STL files only! You will need a 3D... [click here for more] |
2nd Dynasty |
$5.99
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. These double plate floor tiles are from the Corridors II set but can be used in combination with any OpenLOCK tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these... [click here for more] |
2nd Dynasty |
$2.96
|
A basic set of three different 3D Printable (STL) Anatomy Dice to enhance gameplay experience.
D8: Head, Torso, Left Arm, Right Arm, Left Leg, Right Leg.
D10: Head, Torso, Left Arm, Right Arm, Left Leg, Right Leg, Tail.
D12: Head, Torso, Left Arm, Right Arm, Left Leg, Right Leg, Left Wing, Right Wing.
... [click here for more] |
Spiral Lane Productions |
$9.00 $0.79
|
One of my favorite D&D monsters. Every other version of the purple worm that I could find was either massively underscaled or it only showed the worm's head emerging from the ground. So, I made my own. This gargantuan magical beast should be the proper scale for 28mm/32mm miniatures. Next time your adventurers are exploring the underdark, just put this miniature on the table off to the side and... [click here for more] |
Ataraxia Theatre |
$5.00
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for your wargaming board:
A painting guide is also avaible on Wargamevault.
More scenery, buildings, streets and accessoirs can you download on Wargamevault.
This parts are included:
Minimum printbed needed is 20 x 20 cm and 20 cm... [click here for more] |
ESLO |
$9.95 $8.50
|
Tabletop compass (metrical), in STL-format, to measure distances in tabletop-games
in 12,5mm pitch with 25mm (+~inch) numbering
split for easier printing for smaller 3D-printers and with/-out pads to avoid warping
some gluing needed
... [click here for more] |
Xerbath |
$1.99
|
IF YOU ARE SEEING THIS ITEM FOR SALE ON A SCAM SITE, DON'T BUY IT, YOU CAN GET IT FOR FREE AT THE WARGAME VAULT - www.wargamevault.com
These files are Creative Commons for your personal (NON-COMMERCIAL) use only CC BY-NC-SA 4.0.
Two options for the price of one! "Quick and Durty" multi-part explosion markers. PDF, AI and SVG patterns for producing 3D laser cut parts... [click here for more] |
Yellow Sign Studio |
Pay What You Want
|
Tabletop calipers metrical, in STL-format to measure distances in tabletop-games
The scale is included in different versions:
in 5mm pitch with cm numbering and in 25mm (+~inch) numbering
split for easier printing for smaller 3D-printers and with/-out pads to avoid warping
some gluing needed
... [click here for more] |
Xerbath |
$1.99
|
Create your own gargantuan drive which could represent a gravity drive, power plant, or FTL drive for your Sci-Fi rpg or tabletop wargame! Comes in 2x2 square inch base and 4x4 square inch base varaints.
The model is designed to be printed in parts and assembled using OpenLOCK clips (available from printablescenery.com for free). The parts snap together for glueless assembly.
Compatible with the... [click here for more] |
2nd Dynasty |
$11.24
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
Pay What You Want
|
The YD-7 Kojedo arachnoid mecha from GearHead RPG. The Kojedo is a support and command mecha equipped with advanced sensors, long range weapons, and a powerful electronic warfare suite. This kit includes 1/300 and 1/400 scale versions. Suitable for use in any mecha RPGs or wargames. The download includes stl files for all of the needed parts plus 50mm and 35mm hexagonal bases.
... [click here for more] |
Ataraxia Theatre |
$2.00
|
3 Meteor Tales Races STL 3D Printable files!
Brutgor.
Gargoyle.
Sarcanta.
... [click here for more] |
Spiral Lane Productions |
$9.25 $1.59
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print some Drow or Dark Elves buildings just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we... [click here for more] |
Via Ludibunda |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
You can mix and match some parts with the designs from the Village... [click here for more] |
Via Ludibunda |
Pay What You Want
|
Winterdale Blacksmith
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
Procurez vous ce matériel de jeu pour Diaspora : des jetonsà imprimer en 3D pour suivre divers effets et objectifs en jeu, ainsi que le total de points de Karma de chaque joueur.
Diaspora est un jeu de figurines d'escarmouches, où deux à quatre joueurs peuvent s'affronter dans des scénarios narratifs entre les étoiles du Second Moyen-Âge. Recrutez votre équipe parmis une des factions exotiques... [click here for more] |
Corentin Simon |
$1.38
|
Winterdale Bridge Cottage
Fantasy Cottage 5.0 5 Part Fantasy Cottage Optional removable door Interior fully modelled
Copyright©2017 www.printablescenery.com
See the video below for more information ... [click here for more] |
www.printablescenery.com |
$9.95
|
Bladegrip is a painting handle for the wargame painters, such as myself, who paint miniatures on wooden craft sticks. The miniatures are mounted on a 6 inch craft stick, and the craft stick is mounted on the Bladegrip: giving you a much more substantial tool to work with. Bladegrip provides more control and easier manipulation while also cutting... [click here for more] |
Andrew Lonon |
$20.00
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for your wargaming board:
A painting guide is also avaible on Wargamevault.
More scenery, buildings, streets and accessoirs can you download on Wargamevault.
This parts are included:
and the Stonecircle as EXTRA (see in the preview... [click here for more] |
ESLO |
$9.95 $8.50
|